Industrial Dust Proof Workshop Automatic High Speed PVC Roller Up
Shutter Doors For dust-free plant
PVC Automatic and High Performance Speed Door is the solution to
the high-level clean environment which needs prevent dust and
anti-bacteria, applied in the busy passageway area with high
clearness demands,strong wind-resistance,especially for the
food,pharmacy, dust proof workshop and fine machining industry.
Features:
1) Special design for factory’s outside application
2) high frequent using of the outside logistics demands.
3) High speed auto opening and closing for the logistics
transferring.
4) Quick reaction by the controlling of the activation way.
5) Auto time-delayed function adjustment based on good transferring
time.
6) Sustained innovation on the product.
7) Energy saving for the temperature difference.
8) High efficient for the door operation.
9) Adopting “Absolutely Encoder” to avoid the top and end position
readjusting after the power off.
10) Unique Man-Machine Interface to ensure the smooth operation.
Error shooting function is also a tool for engineer to find the key
of problem shortly.
11) Door controlling system is easy to meet the different demands.
12) Standard activation terminals are equipped with the control
system to avoid trouble when the door’s opening and closing way
changed.
13) Unique design and innovation on “Main Board”.
14) One-Key push button to Up and Down the door manually.
15) RED EMERGENCY STOP push button for “STOP” function in Emergent
status.
16) High Frequent Motor with auto-brake function.
17) Anti-rusty 304 stainless steel suits for the cleaning
environment application.
18) Unique inner Nylon molded frame and double lines brushes will
avoid dust go through the door.
19) More wider dimension shaft to ensure the door to roll up
stably.
20) With stronger anti-load wind bar for wind load.
21) Wireless safety edge for shoulder protection during the door
operation.
23) Viewing windows or transparent stripe will provide the
convenience during the door operation.
24) Build-in Photo cell provide the unnecessary opening and closing
caused by the wind pressure.
25) IP 65 Control box.
26) Locker equipped with main Switch for unnecessary opening of the
control box.
27) Emergency handle to meet the power off status.
product properties:
| Control System | Japan Mitsubishi Inveter, PLC and other components. |
| Dynamical Systems | Motor: SEW or Nord from Germany Factory.(China unit: SEJ/SERVO
system) |
| Most stable brake system or Advanced Servo System, 220V~380V/50
-60HZ |
| Power: 0.75kw ~ 3.0kw(According to the size of door) |
| Fast Speed Gate Construction |
| Framework | In 2mm thickness cold-roll steel sheet or on request in Stainless
steel INOX201/304, Plaint color accordingly to your order |
| Rolling Drum | 2mm thickness steel/Galvanized rube with machined blacks at each
side and incorporating high-speed bearing. |
| Cross Bar | Normal in aluminum rod for small doors. Additional with Steel pipe
for large opening and high-wind application. |
| Color | Red/Yellow/Blue/Sky blue/Orange/Mesh white and
yellow/White/Green/Black/Grey. |
| Transparent Window | Transparent pvc sheet 1.5mm thickness. Window sizes and loaction
accordingly to your requirement. |
| Command System | Magnetic Loop/Radar Sensor/Rope switch/Remote Control/Finger
printer/Bluetooth/Key card etc. |
| Safety System & Seal |
| Photocell Sensor | Installed ont he side track with emergency rebound opening when
sensing obstacles. |
| Safety edge bottom | When the people or vehicle touch the bottom edge of closing doors,
It bound up automaticlly. |
| Emergency stop protection | With emergency stop button on the main control board. |
| Seal | Seal brush are installed inside of guider rail. Besides there is
trap heavier fabric on the bottom, Close to any uneven ground. |
| Technical Parameter | Power Supply: Single or Three phase 110V~260V.. Three phase
380V~460V. 50/60HZ. |
| Max Size: 10m width * 15m height |
| Opening & Colsing speed: 0.7~1.5m/S |
| Operation Frequency: 1000~1500 Cycles/Day |
| Wind load: 15m/S |
Why Choose Us?
Over the years, our company has been working with the well-known
manufacturers work closely with gated, has introduced the latest
and most sophisticated production equipment of various volumes
gate. The use of superior Quality raw materials and high-quality
components, and adhere to the " excellence, precision production"
product concept, to ensure the production of a variety of beautiful
rolling door products Generous, easy operation, security, security,
durability, quality assurance. We spirit of "honesty, quality first, customer first, service
leader," the case Purpose, passion for the community to provide the
safest customers the best a variety of roll gates, but also provide
comprehensive maintenance service.
Customers satisfaction is our eternal goal. We adhere to the management principles of "quality first, customer
first and credit-based" since the establishment of the company and
always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from
all over the world in order to realize a win-win situation since
the trend of economic globalization has developed with
anirresistible force.
F A Q :
1,Are you trading company or manufacturer ?
A: We are factory.
2. What's the payment details?
Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T
in advance ,balance before shippment.
3. What's the delivery time?
For common order, about 15 days only.
4. What about the warranty for the doors?
We provide 12 months warranty for all doors and accessories.
5. Do you provide OEM Service?
Yes. OEM & ODM Service is ok for us.
6. What's the MOQ?
We accept 1 set as sample order.
7. How about the package?
Plywood case, suitable for sea freight or air freight, as your
request.
